I have 2 - 512 Meg Kingston Hyper-X modules (CAS 2), the Asus A8V motherboard, and the FX-53 mitherboard.
After upgrading to the 1007 bios I forgot all my memory settings, and am wondering fi somoene could help me out. There’s so many of them…
Thanks! :)
OK this is all the info I have from the pdf from Kingston.
- 64x64 bit
- Read latency 2
- Programmable burst, 2,4,8
- Timing reference 2-3-3-7-1
And here are my BIOS options:
- DRAM Over 4G remapping: On,Off
- Bank Interleaving: Auto, On,Off
- Node Interleaving: Auto, On,Off
- Burst Length: 8,4 beats
- TRC: 7,8,9,10,11,12,13, CLK
- TRFC: 9,10,11,12,13,14,15, CLK
- TRCD: 2,3,4,5,6, CLK
- TWR: 2,3, CLK
- TRWT: 1,2,3,4,5,6, CLK
- TRAS: 5,6,7,8,9,10,11,12,13,14,15, CLK
- TRP: 2,3,4,5,6, CLK
- TWCL: 1,2, CLK
- Read Preamble Setting: 2,3,4,5,6,7,8,9, ns
- 2T Command: Auto, On, Off